Ampire 3606V Manual de Instalação descarregar pdf (Página 6)

10 11

Basic Commands (Direct Access)

Arm

Press and release

AUX

The alarm arms, doors lock (if connected), and the siren chirps and

parking lights ﬂash once. If Valet mode* is On, the doors lock without

siren chirps, the alarm is disabled. Exit Valet mode to arm the alarm

normally.

If a trigger zone fault is detected the siren chirps once again and the

control center LED generates a Trigger Zone Fault report**.

To Arm and Panic

Press and hold

AUX

The alarm Arms (or Locks in Valet) and, after two seconds, sounds

the siren and ﬂashes the parking lights. Press the

AUX

button

to stop the output.

Disarm

Press and release

AUX

The alarm disarms, doors unlock (if connected), and the siren chirps

and parking lights ﬂash twice.

An Alarm Report** alert of four or ﬁve siren chirps will replace the

normal disarm chirps if the alarm was triggered.

Remote Start/Aux 1/Aux 4

Press and release

AUX

Remote Start ***

Activates (or if On, deactivates) the remote starter. The engine and

parking lights turn On, or the engine and parking lights turn Off

accordingly.

AUX1/AUX4 ****

Activates (or if on, deactivates) the aux 1or aux 4 output..

AUX/Trunk

Press and hold

AUX

The Trunk opens (if connected) when this button is pressed for

2 seconds.

* See “Remote and System Operations” on page <?>.

** See “Alarm Features” on page <?> for more details.

*** Available only with optional Remote Start module installation.

**** This feature must be turned on by an authorized Directed dealer.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Comentários a estes Manuais

Sem comentários

Ampire 3606V Manual de Instalação Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Ampire 3606V